CEMSA >详细信息
CC圆锥破碎机()
CC cone crusher
发布时间:2018年08月28日 浏览次数:
+ . -

  CC系列圆锥破碎机是南昌矿机引进国际先进技术和研究成果,成功研发的新一代产品。广泛应用于各类最坚硬和高磨蚀性矿物岩的破碎作业。

  产品特点

  1.传动齿轮

  大小螺旋锥齿轮,可实现大扭矩和高能效传动。

  2.可调偏心距

  偏心村套,偏心套两者组合,通过键安装在偏心衬套不同的键槽中可轻易实现多个偏心距设定,以适应不同矿石和工况的要求,从而实现挤满仓给料。

  3.曲线破碎腔

  根据物料层压破碎原理和腔壁磨损特性,腔型设计为曲线,能确保破碎机产量大、产品质量高、磨损成本低的目标。

  4.过载保护系统

  通过液压、电气共同保护主机过载,尽可能降低过载时对主机的损伤。

  5.AutoRun自动控制系统

  能实现破碎作业过载保护、过铁保护、衬板磨损自动补偿等,通过挤满仓给料,能使破碎机功效发挥到最大。

  6.可靠的液压润滑系统

  润滑系统、液压系统按模块化设计,各自独立运行,通过与主电机联锁,可实规油温、流量、压力、功率、异常电源等保护。

点击查看原图

  

  CC cone crusher is successfully developed by NMS through introduction of foreign advanced technology and research findings. It is widely used invarious hard and abrasive rocks.

  Features

  1.Transmission gear

  Bevel and pinion gears can keep the crusher with big torque and high efficient transmission。

  2.Eccentric setup

  To meet the requirement of different mining applications, combination of main shaft, eccentric bushing and eccentric sleeves are easily adjusted.

  3.Curved crusher chamber

  According to the principle of lamination crushing and the feature of chamber wall wearing, the shape of cone crusher chamber is designed as curve, so as to obtain larger productivity,high quality and less wearing cost.

  4.Overload protection system

  The damage caused by overloading can be reduced through hydraulic and electrical protection system.

  5.Auto Run auto operation system

  Overload protection, tramp iron protection, wearing plate auto compensation and choke feeding makes the efficiency of the cone crusher up to maximum.

  6.Modern reliable hydraulic lubrication system

  The lubricating system and hydraulic system are designed according to the modularity and operate independently. The system cooperates with the main motor, oil temperature, flow, pressure, power, abnormal power supply and other protection can be achieved.

XML 地图 | Sitemap 地图