CEMSA >详细信息
GC旋回破碎机()
GC Gyratory Crusher
发布时间:2018年08月28日 浏览次数:
+ . -

  GC系列旋回破碎机适用于各种岩石和矿石的初级破碎。相对其它初级破碎设备,具有处理量大,破碎效率高,破碎比大,产品粒度均匀,低能耗,破碎腔内磨损均匀等特点,适合特大生产规模的条件下使用。

  产品特点Features

  1.破碎腔适用于大粒径入料要求,破碎性能最佳。

  2.具有外置调整齿轮侧隙装置,调整和维护更加方便。

  3.横梁无需拆卸立即更换横梁衬套和油封,大量减少设备停车时间,减少因维护造成的产量损失。

  4.采用平衡式设计,设备在工作运行状态时冲击力小,更加稳定可靠。

  5.高强度的机架设计,适应各种恶劣工况环境。

  6.配有主轴定位系统,可以轻松调节主轴,调整排料口的大小。

  7.主轴和动锥采取一体式结构设计,避免破碎过程中出现动锥松动。

  8.润滑系统,液压系统按模块化设计,各自独立运行,通过与主电机连锁,基于PLC控制系统,可实现油温、流量、压力、功率、异常电压电流等监测、记录和保护。

点击查看原图

  

GC series gyratory crusher is used in the primary crushing of various rocks, features as follows: large capacity, higher crushing efficiency,larger reduction ratio, even product size, lower energy design, etc., which is fit for the application of larger capacity.

Features

1.Crushing chamber meets the requirement of the larger feed size with perfect crushing performance.

2.It is more convenient to adjust and maintain with external gear side tolerance adjustment.

3.The cross beam bushing and the seal can be replaced without dismantling cross beam, so as to reduce the shut-down time and production loss caused by maintenance.

4.Adopting the balanced design, the device has small impact force and more stable during operation.

5.With robust frame design, the crusher fits various tough applications.

6.Equipped with mainshaft positioning system, it can easily adjust the mainshaft and CSS。

7.Integrated design of mainshaft and mantle to avoid the loose mantle during the operation.

8.Lubrication system, hydraulic system according to the modular design, operated independently, with the main motor chain, based on PLC control system, which can realize the oil temperature, flow, pressure, power, abnormal voltage current monitoring, recording and protection.

XML 地图 | Sitemap 地图